With the rapid development of the construction industry, more and more cable bridges are used in the project. Consumers like and love their performance and love. Because of more and more use, the requirements for equipment are also rising, so sometimes we need to use equipment coated with anti-corrosion coating, corrosion equipment and work, but what problems should be paid attention to in the selection of anti-corrosion coating? Let's take a look.

　　應特別注意山東電纜橋架在不同工況下的防腐材料。

　　Special attention should be paid to the anticorrosive materials of Shandong cable tray under different working conditions.

　　1. 涂層表面的材料特性。

　　1. Material characteristics of coating surface.

　　2. 涂裝對象的使用環境。防腐涂層與環境有很強的相關性。根據具體的應用環境，如介質類型、濃度、溫度、設備運行等因素，選擇合適的防腐涂料類型和型號。

　　2. Application environment of painting object. There is a strong correlation between anticorrosive coating and environment. According to the specific application environment, such as medium type, concentration, temperature, equipment operation and other factors, select the appropriate type and model of anti-corrosion coating.

　　3.防腐涂料施工條件。根據電纜橋架施工現場的實際情況，選擇合適的防腐涂料品種，在刺繡施工、水下施工、水泥基層施工、塑料基層施工、防腐涂料等施工條件下，選擇不同的防腐涂料、合金結構。

　　3. Construction conditions of anticorrosive coating. According to the actual situation of the cable bridge construction site, select the appropriate anticorrosive coating varieties, and select different anticorrosive coating and alloy structure under the construction conditions of embroidery construction, underwater construction, cement base construction, plastic base construction, anticorrosive coating, etc.

　　4. 技術經濟綜合效應。材料成本、表面處理成本、施工成本、涂裝性能、使用壽命、維護成本等。

　　4. Comprehensive effect of technology and economy. Material cost, surface treatment cost, construction cost, coating performance, service life, maintenance cost, etc.

　　防腐涂料的施工質量對涂料的性能有很大的影響。在實際涂裝過程中，由于施工方法不當，無法達到預期的防腐效果。特別是，許多優良的防腐涂料對施工方法非常敏感。只有嚴格按照自己的施工條件，才能形成正常的涂層，達到預期的防腐保護效果。基材應經過嚴格的表面處理。對鋼基體進行除銹、脫脂，磷化處理可根據具體情況確定。

　　The construction quality of anticorrosive coating has a great influence on the performance of coating. In the actual coating process, due to the improper construction method, the expected anti-corrosion effect cannot be achieved. In particular, many excellent anticorrosive coatings are very sensitive to the construction method. Only in strict accordance with their own construction conditions, can form a normal coating to achieve the desired anti-corrosion protection effect. The base material shall be strictly surface treated. Derusting, degreasing and phosphating treatment can be determined according to the specific situation.

　　防腐施工時，應保證防腐層的必要厚度。防腐層的厚度必須超過其臨界厚度才能起到保護作用，一般為150 m~200 m。控制噴涂現場的溫度、濕度等環境因素。室內涂裝溫度控制在20℃~25℃;

　　The necessary thickness of anti-corrosion coating shall be ensured during anti-corrosion construction. The thickness of the anti-corrosion coating must exceed its critical thickness to play a protective role, generally 150 m ~ 200 m. Control the temperature, humidity and other environmental factors at the spraying site. The indoor coating temperature is controlled at 20 ℃ ~ 25 ℃;

　　例如，應用高溫防腐涂料的溫度必須大于10℃，相對濕度隨品種變化，一般在65%左右為宜。室外施工時，不得有風、沙、雨。溫度不得低于5℃，相對濕度不得高于85%。未固化的涂料應避免結霜、露、雨和灰塵。控制噴射間距。如果在面漆前放置時間過長，將難以附著，影響整體防護效果。

　　For example, the application temperature of high-temperature anticorrosive coating must be greater than 10 ℃, and the relative humidity changes with the variety, generally around 65%. During outdoor construction, there shall be no wind, sand or rain. The temperature shall not be lower than 5 ℃ and the relative humidity shall not be higher than 85%. The uncured coating shall be free from frost, dew, rain and dust. Control the spray distance. If the time before finishing coat is too long, it will be difficult to adhere and affect the overall protection effect.

　　以上是今天給大家分享關于山東電纜橋架防腐涂料的選擇,需要注意事項四個方面的相關內容,希望能幫助大家,如果你想要更多的可以電話聯系我們或在我們的網站上,我們的工作人員會及時與你聯系,期待你的電話。

　　The above is to share with you today about the selection of anticorrosive coating for cable tray in Shandong Province. We need to pay attention to four aspects of relevant content. I hope to help you. If you want more, you can contact us by phone or on our website. Our staff will contact you in time and look forward to your call.